Calcite & Coconut Shell GAC Filter Cartridge
Calcite & Coconut Shell GAC Filter Cartridge
$37.05
Regular price $39.00
SKU CQE-RC-04012
Save $1.95 compared with one-time purchase
Natural calcite raises the pH of acidic or very soft water and adds calcium back, while coconut shell carbon removes off tastes and odors, for balanced,...
Read moreCouldn't load pickup availability
Description
Water that tastes flat or faintly metallic. Blue-green stains under the faucet. A test report that reads acidic or very soft. Low-pH, low-mineral water is aggressive: it pulls metal from the plumbing it travels through and can taste lifeless in the glass.
This Calcite & Coconut Shell GAC Filter Cartridge answers both problems in one stage. Natural calcite, a calcium carbonate mineral, dissolves slowly into soft or acidic water to raise its pH and add calcium back, and coconut shell granular activated carbon polishes taste and odor before the water leaves the cartridge. Four sizes fit standard 2.5 x 10, 2.5 x 20, 5 x 10 and 5 x 20 inch housings, including Crystal Quest countertop, under-sink and whole house systems, with published capacities from 3,000 to 18,000 gallons.
At a glance
- Raises low pH naturally: calcite neutralizes acidity by dissolving into the water, with no chemical feed
- Self-limiting: calcite corrects toward a neutral, non-corrosive balance and does not overshoot under normal conditions
- Carbon polish built in: coconut shell GAC improves taste and odor in the same cartridge
- Published capacity per size: 3,000 to 18,000 gallons at under 100 ppm hardness
- Four sizes, 0.5 to 6 GPM, with a typical life of 12 to 24 months
What you are looking at
The cartridge is a polypropylene casing with polypropylene end caps, filled with a mixed bed of white calcite granules and black coconut shell carbon. A polypropylene expansion pad keeps the bed packed, a spun polypropylene post-filter sits at the outlet, and a Buna-N gasket on top seals against the housing cap. Each end cap has 1-micron pads behind its openings.
How a calcite filter works
Neutralizing acidity with calcium carbonate
Acidic water is hungry for minerals. When it flows through calcite, it dissolves a small amount of the calcium carbonate, and that reaction consumes the acidity and raises the pH. The more acidic the water, the more calcite it dissolves; as the water approaches a neutral balance the reaction slows on its own. That self-limiting behavior is why calcite is the classic, forgiving choice for correcting low pH.
Remineralization
The calcium that dissolves stays in the water. That is the point for very soft or low-mineral water: it gains back some of the mineral content that gives water body and helps it sit in balance with your pipes. It also means calcite adds a little hardness, which is normal and expected.
Coconut shell GAC as the polishing stage
Activated carbon is honeycombed with microscopic pores that hold on to the organic compounds behind off tastes and odors. Here the coconut shell GAC acts as a post-polisher inside the cartridge, so the water that comes out tastes clean as well as balanced.
Why calcite gets used up
Calcite works by dissolving, so the bed slowly shrinks as it treats water. More acidic water and higher use consume it faster. That is why each size carries a gallon estimate and why replacement on schedule matters more here than with a purely mechanical filter.
What it treats
Primary jobs:
- Low pH and acidity: raises pH toward neutral
- Low-mineral, very soft water: adds calcium back
- Taste and odor: coconut shell GAC polishing, including chlorine taste
Where it helps your plumbing: in a whole house housing, water that has been brought toward neutral before it reaches your pipes is less corrosive to copper and brass. In a countertop or under-sink system, it balances the water you drink and cook with at that tap.
Not designed to treat: bacteria and viruses, fluoride, nitrate, lead and other heavy metals, iron, or high VOC and chloramine loads (the carbon here is a polishing stage, not a full carbon stage). It is not for water that is already neutral or alkaline. For those jobs, see the GAC Filter Cartridge, the Lead Filter Cartridge and Crystal Quest's fluoride and reverse osmosis options.
Why Crystal Quest
- Two treatments, one housing. pH correction and carbon polishing in a single cartridge saves a stage and a housing.
- Capacity you can plan around. Every size publishes a gallon estimate and its test condition, so you can match the cartridge to your daily use.
- Over 1,000,000 people served since 1994. Crystal Quest builds under ISO 9001 quality management and has made water filtration in the USA for over 30 years.
- Lifetime support. Send us your water test and our team will tell you whether calcite is the right correction for it.
Where it fits
- Systems that specify calcite and coconut shell GAC: Crystal Quest countertop, under-sink and whole house cartridge housings
- Acidic well water or very soft water where a test shows low pH
- Not the alkaline mineralizer: this cartridge is calcite plus coconut GAC; the separate alkaline mineralizer uses a calcium and magnesium blend, and the phosphate and GAC cartridge is a different treatment again
Pick the size printed on your current cartridge or in your order history: 2-7/8" x 9-3/4" (CQE-RC-04012), 2-7/8" x 20" (CQE-RC-04024), 4-5/8" x 9-3/4" (CQE-RC-04075) or 4-5/8" x 20" (CQE-RC-04080).
Common questions
What does each media do?
Calcite supplies calcium carbonate that dissolves into soft, acidic or low-pH water to raise its pH and add minerals. Coconut shell GAC adds a polishing stage for taste and odor inside the same cartridge.
How does a calcite filter raise pH?
Acidic water dissolves a little of the calcium carbonate as it passes through, and that reaction consumes the acidity. As the water nears neutral, the reaction slows, so calcite corrects without overshooting under normal conditions.
Will it produce a particular pH?
No fixed output pH is specified for this cartridge. The result depends on your starting pH, mineral content and flow. Test before and after installation.
Will a calcite filter make my water hard?
It adds some calcium, which raises hardness a little. That is the remineralizing effect working. On already hard water a calcite stage is usually not needed.
Is this the same as the alkaline mineralizer cartridge?
No. This product combines calcite with coconut shell GAC. The separate alkaline mineralizer uses a calcium and magnesium mineral blend.
How long does a calcite cartridge last?
Typically 12 to 24 months, about 18 months for most homes, or up to the size's gallon estimate (3,000 to 18,000 gallons at under 100 ppm hardness), whichever comes first. More acidic water uses calcite faster.
Specifications
Specifications for your selection
2-7/8" x 9-3/4" / Single
- SKU
- CQE-RC-04012
- Capacity
- 3000 gallons
- Flow rate
- 0.5 GPM
- Diameter (width)
- 2.875 in
- Length (height)
- 9.75 in
- Replace every
- 12 to 24 months
Published capacity applies at less than 100 ppm hardness. Capacity is an estimate and depends on incoming contaminants and usage.
Specifications for your selection
2-7/8" x 9-3/4" / Single
- SKU
- CQE-RC-04012
- Capacity
- 3000 gallons
- Flow rate
- 0.5 GPM
- Diameter (width)
- 2.875 in
- Length (height)
- 9.75 in
- Replace every
- 12 to 24 months
Published capacity applies at less than 100 ppm hardness. Capacity is an estimate and depends on incoming contaminants and usage.
Specifications for your selection
2-7/8" x 9-3/4" / Pack of 2
- SKU
- CQE-RC-04012-2PK
- Capacity
- 3000 gallons
- Flow rate
- 0.5 GPM
- Diameter (width)
- 2.875 in
- Length (height)
- 9.75 in
- Replace every
- 12 to 24 months
Published capacity applies at less than 100 ppm hardness. Capacity is an estimate and depends on incoming contaminants and usage.
Specifications for your selection
2-7/8" x 9-3/4" / Pack of 4
- SKU
- CQE-RC-04012-4PK
- Capacity
- 3000 gallons
- Flow rate
- 0.5 GPM
- Diameter (width)
- 2.875 in
- Length (height)
- 9.75 in
- Replace every
- 12 to 24 months
Published capacity applies at less than 100 ppm hardness. Capacity is an estimate and depends on incoming contaminants and usage.
Specifications for your selection
2-7/8" x 20" / Single
- SKU
- CQE-RC-04024
- Capacity
- 8000 gallons
- Flow rate
- 2.5 GPM
- Diameter (width)
- 2.875 in
- Length (height)
- 20.0 in
- Replace every
- 12 to 24 months
Published capacity applies at less than 100 ppm hardness. Capacity is an estimate and depends on incoming contaminants and usage.
Specifications for your selection
2-7/8" x 20" / Pack of 2
- SKU
- CQE-RC-04024-2PK
- Capacity
- 8000 gallons
- Flow rate
- 2.5 GPM
- Diameter (width)
- 2.875 in
- Length (height)
- 20.0 in
- Replace every
- 12 to 24 months
Published capacity applies at less than 100 ppm hardness. Capacity is an estimate and depends on incoming contaminants and usage.
Specifications for your selection
2-7/8" x 20" / Pack of 4
- SKU
- CQE-RC-04024-4PK
- Capacity
- 8000 gallons
- Flow rate
- 2.5 GPM
- Diameter (width)
- 2.875 in
- Length (height)
- 20.0 in
- Replace every
- 12 to 24 months
Published capacity applies at less than 100 ppm hardness. Capacity is an estimate and depends on incoming contaminants and usage.
Specifications for your selection
4-5/8” x 9-3/4” / Single
- SKU
- CQE-RC-04075
- Capacity
- 8000 gallons
- Flow rate
- 3.0 GPM
- Diameter (width)
- 4.625 in
- Length (height)
- 9.75 in
- Replace every
- 12 to 24 months
Published capacity applies at less than 100 ppm hardness. Capacity is an estimate and depends on incoming contaminants and usage.
Specifications for your selection
4-5/8” x 9-3/4” / Pack of 2
- SKU
- CQE-RC-04075-2PK
- Capacity
- 8000 gallons
- Flow rate
- 3.0 GPM
- Diameter (width)
- 4.625 in
- Length (height)
- 9.75 in
- Replace every
- 12 to 24 months
Published capacity applies at less than 100 ppm hardness. Capacity is an estimate and depends on incoming contaminants and usage.
Specifications for your selection
4-5/8” x 9-3/4” / Pack of 4
- SKU
- CQE-RC-04075-4PK
- Capacity
- 8000 gallons
- Flow rate
- 3.0 GPM
- Diameter (width)
- 4.625 in
- Length (height)
- 9.75 in
- Replace every
- 12 to 24 months
Published capacity applies at less than 100 ppm hardness. Capacity is an estimate and depends on incoming contaminants and usage.
Specifications for your selection
4-5/8” x 20” / Single
- SKU
- CQE-RC-04080
- Capacity
- 18000 gallons
- Flow rate
- 6.0 GPM
- Diameter (width)
- 4.625 in
- Length (height)
- 20.0 in
- Replace every
- 12 to 24 months
Published capacity applies at less than 100 ppm hardness. Capacity is an estimate and depends on incoming contaminants and usage.
Specifications for your selection
4-5/8” x 20” / Pack of 2
- SKU
- CQE-RC-04080-2PK
- Capacity
- 18000 gallons
- Flow rate
- 6.0 GPM
- Diameter (width)
- 4.625 in
- Length (height)
- 20.0 in
- Replace every
- 12 to 24 months
Published capacity applies at less than 100 ppm hardness. Capacity is an estimate and depends on incoming contaminants and usage.
Specifications for your selection
4-5/8” x 20” / Pack of 4
- SKU
- CQE-RC-04080-4PK
- Capacity
- 18000 gallons
- Flow rate
- 6.0 GPM
- Diameter (width)
- 4.625 in
- Length (height)
- 20.0 in
- Replace every
- 12 to 24 months
Published capacity applies at less than 100 ppm hardness. Capacity is an estimate and depends on incoming contaminants and usage.
- Cartridge type
- Calcite & Coconut Shell GAC Filter Cartridge
- Format
- Drop-in replacement cartridge
- Dimensions
- Actual cartridge diameter x length in inches; nominal housing names are not cartridge measurements
- CQE-RC-04012 (2-7/8" x 9-3/4")
- 0.5 GPM; 3,000 gallons estimated at less than 100 ppm hardness
- CQE-RC-04024 (2-7/8" x 20")
- 2.5 GPM; 8,000 gallons estimated at less than 100 ppm hardness
- CQE-RC-04075 (4-5/8” x 9-3/4”)
- 3 GPM; 8,000 gallons estimated at less than 100 ppm hardness
- CQE-RC-04080 (4-5/8” x 20”)
- 6 GPM; 18,000 gallons estimated at less than 100 ppm hardness
- Filter media
- Acid washed coconut shell activated carbon and calcite
- Size selection
- Use the exact actual cartridge measurements and specified system replacement
- Capacity conditions
- Published capacity applies at less than 100 ppm hardness. Capacity is an estimate and depends on incoming contaminants and usage.
- Replacement guidance
- Typically 12 to 24 months, about 18 months for most homes; actual life depends on water quality and usage
Calcite and GAC cartridge specifications
Published ratings apply to the selected cartridge and listed conditions. Capacity is an estimate that depends on incoming water contaminants and usage. Sizes are actual cartridge diameter x length.
| SKU | SIZE | FITS HOUSING | FLOW RATE | CAPACITY (<100 PPM HARDNESS) |
| CQE-RC-04012 | 2-7/8” x 9-3/4” | 2.5" x 10" | .5 gpm (1.9 lpm) | 3,000 gallons* |
| CQE-RC-04024 | 2-7/8” x 20” | 2.5" x 20" | 2.5 gpm (9.4 lpm) | 8,000 gallons* |
| CQE-RC-04075 | 4-5/8” x 9-3/4” | 5" x 10" Big Blue | 3 gpm (11.4 lpm) | 8,000 gallons* |
| CQE-RC-04080 | 4-5/8” x 20” | 5" x 20" Big Blue | 6 gpm (22.7 lpm) | 18,000 gallons* |
Media and treatment
| Media | Premium Coconut Shell GAC and Calcite |
| Treats | Low pH and acidity, low-mineral water, taste and odor |
| Output pH | Not specified; depends on incoming water |
| Not designed for | Neutral or alkaline water, fluoride, nitrate, heavy metals, microbiologically unsafe water |
Operating conditions
| Water temperature | 40°F to 145°F (4.4°C to 62.8°C) |
| Typical replacement | 12 to 24 months, or the size's gallon estimate, whichever comes first |
| Construction Materials | |
| Fiber Media | Mixed Blend |
| End Caps | Polypropylene |
| End Pads | 1-micron pads behind the end-cap openings |
| Post-Filter | Spun Polypropylene |
| Outer Casing | Polypropylene |
| Expansion Pad | Polypropylene |
| Gasket | Buna-N (Top) |
| Temperature Rating | 40°F to 145°F (4.4°C to 62.8°C) |
*Capacity is an estimate and depends on incoming water contaminants and usage. Typically replace every 12 to 24 months, about 18 months for most homes; replace sooner if taste, odor, flow or pressure changes.